Watch Winder Settings for ETA: TPD and Direction
Set an ETA winder to the 650–800 TPD band and check the direction before anything else. The 4 automatic calibres listed here need between 460 and 510 TPD to hold a full wind, because the reserves run 38–42 hours. The 1 hand-wound calibre gain nothing from a winder.
ETA TPD and direction by calibre
| Calibre | Type | Reserve (h) | Beat (vph) | Direction | Min TPD | Recommended | Note |
|---|---|---|---|---|---|---|---|
| 2824-2 | Automatic | 38 | 28,800 | Bidirectional | 510 | 650–800 | The most common base movement in the industry |
| 2892-A2 | Automatic | 42 | 28,800 | Bidirectional | 460 | 650–800 | — |
| 2836-2 | Automatic | 38 | 28,800 | Bidirectional | 510 | 650–800 | Day-date version of the 2824 |
| 2893-2 | Automatic | 42 | 28,800 | Bidirectional | 460 | 650–800 | GMT module on the 2892 |
| 6497-1 / 6498-1 | Manual | 46 | 18,000 | n/a | — | n/a | Hand-wound pocket-watch calibre; 18,000 vph |
Rows marked n/a are hand-wound or quartz. A winder adds nothing to either: no rotor to turn, or no mainspring to hold. Full method and the other 38 brands are in the TPD settings database.
What makes ETA different
ETA is the reference point for the rest of this database. The 2824-2 runs 38 hours, the 2892-A2 42, and both wind bidirectionally at 28,800 vph.
The 6497-1 pocket-watch calibre is hand-wound at 18,000 vph and needs no winder. Any watch built on an ETA base — Alpina, Ball, TAG Calibre 5, Breitling B17, Tudor’s older models — inherits these numbers exactly.
Setting an ETA winder in four steps
- Set the direction first. Bidirectional for the automatics on this page. Direction is the setting that silently does nothing when it is wrong.
- Wind to full on the published band. Run 650–800 TPD for 48 hours to fill the mainspring from stopped. Do not start at the calculated minimum — that figure holds a wind, it does not build one.
- Check the power reserve. After 48 hours, take the watch off and let it run down. Full reserve means the setting works. Short means raise TPD or reverse the direction.
- Back the setting down if you want less wear. Once the reserve is confirmed, the calculated minimum (460–510 TPD) holds the watch at full wind with fewer cycles. This is optional, not required.
Winders that can be set to these numbers
Per-rotor TPD and direction programming is the only requirement — a winder with a single fixed programme cannot follow the table above.
- Premium Intelligent 4 Watch Winder with Touch Control
- Silent Watch Winder Microfiber Leather with LCD Touch Screen(black+red) for Men
- LCD Touch Screen 12 Watch Winder for 12 Automatic Watches
Frequently asked questions
What TPD should I set for an ETA watch winder?
650–800 TPD is the band to start with. The calculated minimum — the turns that replace one day of running — is 460–510 TPD for the calibres on this page. Start on the band for 48 hours to fill a stopped watch, then back the setting down towards the calculated figure if you want less wear.
Which direction should an ETA winder turn?
Bidirectional. Every automatic ETA calibre in this database winds in both directions, so either setting works. If the watch shows no gain after 48 hours, the problem is the TPD, not the direction.
Can I leave an ETA on the winder permanently?
Yes, at a setting near the calculated minimum. ETA reserves here run 38–42 h, so 460–510 TPD holds the watch at full wind without cycling the mainspring more than necessary. Check the reserve after 48 hours before settling on a permanent setting.
Do hand-wound ETA models need a winder?
No. The 6497-1 / 6498-1 is hand-wound: there is no rotor for the winder to turn, so it adds nothing. Keep it off the winder.
Where do these ETA figures come from?
Reserve and beat rate are manufacturer-published figures for each calibre; direction and the recommended band are published workshop practice. Only the Minimum TPD column is calculated: 24 ÷ reserve hours × 800, rounded. Full method and the CSV download are on the TPD settings database.
Source, version and citation
Figures are from Aurawinder’s Watch Winder TPD Settings Database, version 2.0, updated 9 November 2026, released under CC BY 4.0. The minimum TPD column is calculated as round(24 ÷ reserve hours × 800, -1); every other figure is published data. Reuse is allowed with attribution.
Cite this data
CC BY 4.0 · free to reuse · keep the linkAurawinder. "ETA Watch Winder TPD Settings," database version 2.0, updated 9 November 2026. https://www.aurawinder.com/tpd/eta/ (CC BY 4.0).
<a href="https://www.aurawinder.com/tpd/eta/">Aurawinder TPD Database: ETA</a>
Found an error, or an ETA calibre that should be here? Tell us — corrections are logged in the database changelog.