Watch Winder TPD Settings by Brand

Every brand in the TPD settings database, with its own page: the calibres, the published band, the winding direction, and the calculated minimum TPD that actually holds a full wind. 38 brands, 103 calibres, version 2.0.

Pick your brand below. If you do not know the calibre, the brand page lists them all with reserve and beat rate, so you can match the watch in your hand rather than guessing from the model name.

Brand Calibres Reserve (h) Min TPD Direction Band
A. Lange & Söhne 1 72 270 Both 650–800
Alpina 1 38 510 Both 650–800
Audemars Piguet 4 40–70 270–480 Both 650–800
Ball 1 38 510 Both 650–800
Bell & Ross 1 42 460 Both 650–800
Blancpain 2 100–120 160–190 Both 650–800
Breguet 1 38 510 Both 650–800
Breitling 3 38–70 270–510 Both 650–800
Bulgari 1 42 460 Both 650–800
Cartier 3 42–48 400–460 Both 650–800
Certina 1 80 240 Both 650–800
Chopard 1 60 320 Both 650–800
Citizen 1 — — — —
ETA 5 38–42 460–510 Both 650–800
ETA / Valjoux 2 44 440 Clockwise 800–1000
Frederique Constant 1 38 510 Both 650–800
Grand Seiko 4 55–120 160–350 Both 650–800
Hamilton 2 80 240 Both 650–800
Hublot 1 42 460 Both 650–800
IWC 4 42–120 160–460 Mixed 650–800
Jaeger-LeCoultre 4 43 450 Both 650–800
Longines 2 60–64 300–320 Both 650–800
Mido 1 80 240 Both 650–800
Miyota 4 40–42 460–480 Mixed 650–800
Nomos 2 43 450 Both 650–800
Omega 7 48–60 320–400 Both 650–800
Orient 1 40 480 Both 650–800
Oris 2 38–120 160–510 Both 650–800
Panerai 3 72 270 Both 650–800
Patek Philippe 3 45–48 400–430 Both 650–800
Rolex 8 48–72 270–400 Both 650–800
Seiko 7 40–70 270–480 Both 650–800
Sellita 4 38–44 440–510 Mixed 650–800
TAG Heuer 4 38–80 240–510 Mixed 650–800
Tissot 1 80 240 Both 650–800
Tudor 4 70 270 Both 650–800
Vacheron Constantin 3 40–60 320–480 Both 650–800
Zenith 3 50 380 Mixed 800–1000

How to read the table

Reserve is the manufacturer-published power reserve range across that brand’s calibres. Min TPD is the calculated floor: the turns needed to replace exactly one day of running. Band is what the manufacturer publishes, and it is set wide on purpose.

The gap between the two is the point. A brand whose calibres all run 70–80 hours needs roughly half the turns of one whose calibres run 38–42 hours — and a single brand-level number cannot express that.

Why brand is the wrong unit

Most winder instruction sheets give one figure per brand. That figure is inherited from the shortest power reserve in the family, so it over-winds every longer-reserve watch in the same collection. The result is not damage, but it is unnecessary: the mainspring is cycled two to five times more often than the movement consumes.

This directory splits the answer three ways instead: by brand, by calibre, and by reserve. Where two watches from the same brand need different settings — IWC, TAG Heuer, Oris and Rolex all do — the brand page says so in the table rather than averaging them into one number.

Start here if you only want one number

  • Short reserve, 38–44 hours (ETA 2824, Sellita SW200, most TAG Calibre 5, Breitling B17): 650–800 TPD, floor 440–510.
  • Long reserve, 70–80 hours (Rolex 32xx, Tudor MT56xx, Powermatic 80, Heuer 02): 650–800 TPD band, but the floor is only 240–270.
  • Five-day and above, 100–192 hours (Blancpain 1315, Oris 400, IWC 32111, Grand Seiko 9RA2): floor 160–190 TPD.
  • Unidirectional (ETA/Valjoux 7750, Sellita SW500, Miyota 8215, TAG Calibre 16, IWC 79320): direction before numbers — clockwise for the 7750 family, counter-clockwise for the Miyota 8200 family.

Frequently asked questions

What is TPD on a watch winder?

Turns per day — how many full rotations a winder completes in 24 hours. Together with winding direction it is the only setting that controls how much energy reaches the mainspring.

Which TPD does my brand need?

Start on the published band for your calibre, then use the calculated minimum as the floor. The band fills a stopped watch; the minimum holds one that is already wound. Both are listed per calibre on each brand page.

Why do two watches from the same brand need different settings?

Power reserve differs by calibre, not by brand. A 38-hour movement consumes 63% of a full wind per day and needs around 510 TPD; a 70-hour movement consumes 34% and needs around 270. Brands that sell both need two different settings.

Can I trust a brand-level TPD figure?

Only as a starting point. Most tables publish one figure per brand, set for the shortest reserve in the family — which over-winds every longer-reserve watch in the same collection.

Source and licence

Data is version 2.0, updated 9 November 2026, released under CC BY 4.0. Machine-readable copies: CSV and JSON. Method, changelog and the full single-table view are on the database page.

Product was successfully added to your cart!